1、使用變頻器後，空氣壓縮機的壓力設定可以是一點，即可以将滿足生産設備要求的最低壓力作為設定壓力，變頻器将根據管網壓力上下波動的(de)趨勢，通過調節空壓機轉速，消除了(le)空壓機的卸載運行，節約了電能。

1. after using the frequency converter, the pressure setting of the air compressor can be one point, that is, the lowest pressure that meets the requirements of production equipment can be used as the setting pressure. the frequency converter will eliminate the unloading operation of the air compressor and save electricity by adjusting the speed of the air compressor according to the fluctuating trend of the pressure of the pipeline network.

2、由于系統中的變頻器使得管網上下壓力穩定，可以降低甚至消除壓力的波動，從而使系統中所有運行的(de)空氣壓縮機都在一個滿足生産要求的(de)較低的(de)壓力下運行，減少了壓力向上波動造成的功率損失。

2. because of the frequency converter in the system, the downward and downward pressure of the pipeline network is stable, and the fluctuation of pressure can be reduced or even eliminated, so that all the air compressors in the system are operated under a lower pressure which meets the production requirements, thus reducing the power loss caused by the upward fluctuation of pressure.

3、由于空壓機不能排除在滿負載狀态下長時間運行的可能性，所以隻能按最大需求來決定電動機的容量，故設計容量一般偏大。在實際運行中，輕載運行的(de)時間所占的比例是非常高的(de)，如果采用變頻調速，可大大提高運行時的工作效率。因此将變頻器作用在空壓機系統中節能潛力很大。

3. because the air compressor can not rule out the possibility of long-term operation under full load, it can only determine the capacity of motor according to the maximum demand, so the design capacity is generally large. in actual operation, the proportion of light load running time is very high. if frequency conversion speed regulation is adopted, the working efficiency can be greatly improved. therefore, the application of frequency converter in air compressor system has great potential for energy saving.

4、有些調節方式在需求量較小的(de)情況下，也不能降低電動機的運行功率。采用了變頻調速後，當需求量較小的情況下，可降低電動機的轉速，減小電動機的運行功率，從而進一步實現節能。

4. some regulation modes can not reduce the operating power of the motor when the demand is small. after adopting frequency conversion speed regulation, when the demand is small, the speed of the motor can be reduced and the power of the motor can be reduced, thus further realizing energy saving.

5、空氣壓縮機采用了變頻調速後，則可以根據負載的(de)輕重地進行連續調節，能保持壓力、流量、溫度等參數的穩定，從而提高工作性能。

5. the air compressor can adjust continuously according to the weight of load after adopting frequency conversion speed regulation, which can maintain the stability of pressure, flow, temperature and other parameters, thereby improving the performance.